| Customization: | Available |
|---|---|
| Material: | Steel |
| Content: | Steel |
|
Still deciding? Get samples of US$ 0.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Forged grinding balls are made by air hammer and Hot rolling balls are produced by skew rolling technology.
Because of automatic production lines are used, balls' quality control is increasingly perfect.
This makes sure precise size control, stable hardness, uniform internal structure for each ball.
Uniform hardness: 60-65HRC
Low breakage: below 1%
High grinding resistance: 10-30% longer use
High impact value: more than 14j/cm2
High comprehensive efficiency of the mill
Chemical elements of steel balls
| Brand | Materials | C | Mn | Si | Cr | S | P | V | |
| JC-1 | 50Mn | 0.48-0.56 | 0.70-1.0 | 0.17-0.37 | ≤0.25 | ≤0.035 | ≤0.035 | ||
| JC-2 | 60Mn | 0.57-0.65 | 0.70-1.0 | 0.17-0.37 | ≤0.25 | ≤0.035 | ≤0.035 | ||
| JC-3 | 65Mn | 0.62-0.70 | 0.90-1.2 | 0.17-0.37 | ≤0.25 | ≤0.035 | ≤0.035 | ||
| JC-4 | B2 | 0.72-0.85 | 0.70-0.80 | 0.17-0.37 | 0.40-0.70 | ≤0.035 | ≤0.035 | ||
| JC-5 | B3 | 0.58-0.70 | 0.70-1.00 | 1.50-1.90 | 0.70-0.90 | ≤0.035 | ≤0.035 | ||
| JC-6 | B6 | 0.80-0.95 | 0.80-1.00 | 0.17-0.37 | 0.80-1.00 | ≤0.035 | ≤0.035 | ||
| Specification of hot rolling steel Grinding balls | |||||||||
| Nominal diameter | Diameteical Tolerance |
Weight of single ball in average |
Surface hardness |
Impact toughness |
|||||
| (mm) | (mm) | (g) | (HRC) | (j/cm2 ) | |||||
| Φ20 | +2 -1 | 32 | 60-65 | ≥14 |
|||||
| Φ25 | 64 | ||||||||
| Φ30 | 110 | ||||||||
| Φ40 | 263 | ||||||||
| Φ50 | 513 | ||||||||
| Φ60 | +3 -2 | 888 | |||||||
| Φ70 | 1410 | ||||||||
| Φ80 | 2104 | ||||||||
| Φ90 | 2996 | ||||||||
| Φ100 | 4110 | ||||||||
| Φ125 | +3 -3 | 8027 | 58-63 | ||||||
SGS inspection can be conducted before shipment.
){kind=link}